jrouter/aarp.go

/*
   Copyright 2024 Josh Deprez

   Licensed under the Apache License, Version 2.0 (the "License");
   you may not use this file except in compliance with the License.
   You may obtain a copy of the License at

       http://www.apache.org/licenses/LICENSE-2.0

   Unless required by applicable law or agreed to in writing, software
   distributed under the License is distributed on an "AS IS" BASIS,
   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
   See the License for the specific language governing permissions and
   limitations under the License.
*/

package main

import (
	"context"
	"log"
	"math/rand/v2"
	"sync"
	"time"

	"github.com/google/gopacket/pcap"
	"github.com/sfiera/multitalk/pkg/aarp"
	"github.com/sfiera/multitalk/pkg/ddp"
	"github.com/sfiera/multitalk/pkg/ethernet"
	"github.com/sfiera/multitalk/pkg/ethertalk"
)

const (
	// TODO: verify parameters
	maxAMTEntryAge        = 30 * time.Second
	aarpRequestRetransmit = 1 * time.Second
	aarpRequestTimeout    = 10 * time.Second
)

// AARPMachine maintains both an Address Mapping Table and handles AARP packets
// (sending and receiving requests, responses, and probes). This process assumes
// a particular network range rather than using the startup range, since this
// program is a seed router.
type AARPMachine struct {
	*addressMappingTable

	cfg        *config
	pcapHandle *pcap.Handle

	// The Run goroutine is responsible for all writes to myAddr.Proto and
	// probes, so this mutex is not used to enforce a single writer, only
	// consistent reads
	mu         sync.RWMutex
	myAddr     aarp.AddrPair
	probes     int
	assigned   bool
	assignedCh chan struct{}
}

// NewAARPMachine creates a new AARPMachine.
func NewAARPMachine(cfg *config, pcapHandle *pcap.Handle, myHWAddr ethernet.Addr) *AARPMachine {
	return &AARPMachine{
		addressMappingTable: new(addressMappingTable),
		cfg:                 cfg,
		pcapHandle:          pcapHandle,
		myAddr: aarp.AddrPair{
			Hardware: myHWAddr,
		},
		assignedCh: make(chan struct{}),
	}
}

// Address returns the address of this node, and reports if the address is valid
// (i.e. not tentative).
func (a *AARPMachine) Address() (aarp.AddrPair, bool) {
	a.mu.RLock()
	defer a.mu.RUnlock()
	return a.myAddr, a.assigned
}

// Assigned returns a channel that is closed when the local address is valid.
func (a *AARPMachine) Assigned() <-chan struct{} {
	return a.assignedCh
}

// Run executes the machine.
func (a *AARPMachine) Run(ctx context.Context, incomingCh <-chan *ethertalk.Packet) error {
	// Initialise our DDP address with a preferred address (first network.1)
	a.mu.Lock()
	a.probes = 0
	a.myAddr.Proto = ddp.Addr{
		Network: ddp.Network(a.cfg.EtherTalk.NetStart),
		Node:    1,
	}
	a.mu.Unlock()

	ticker := time.NewTicker(200 * time.Millisecond) // 200ms is the AARP probe retransmit
	defer ticker.Stop()

	for {
		select {
		case <-ctx.Done():
			return ctx.Err()

		case <-ticker.C:
			if a.probes >= 10 {
				a.mu.Lock()
				a.assigned = true
				a.mu.Unlock()
				close(a.assignedCh)
				ticker.Stop()
				continue
			}

			a.mu.Lock()
			a.probes++
			a.mu.Unlock()

			if err := a.probe(); err != nil {
				log.Printf("Couldn't broadcast a Probe: %v", err)
			}

		case ethFrame, ok := <-incomingCh:
			if !ok {
				incomingCh = nil
			}

			var aapkt aarp.Packet
			if err := aarp.Unmarshal(ethFrame.Payload, &aapkt); err != nil {
				log.Printf("Couldn't unmarshal AARP packet: %v", err)
				continue
			}

			switch aapkt.Opcode {
			case aarp.RequestOp:
				log.Printf("AARP: Who has %d.%d? Tell %d.%d",
					aapkt.Dst.Proto.Network, aapkt.Dst.Proto.Node,
					aapkt.Src.Proto.Network, aapkt.Src.Proto.Node,
				)
				// Glean that aapkt.Src.Proto -> aapkt.Src.Hardware
				a.addressMappingTable.Learn(aapkt.Src.Proto, aapkt.Src.Hardware)
				// log.Printf("AARP: Gleaned that %d.%d -> %v", aapkt.Src.Proto.Network, aapkt.Src.Proto.Node, aapkt.Src.Hardware)

				if aapkt.Dst.Proto != a.myAddr.Proto {
					log.Printf("AARP: not replying to request for %d.%d (not my address)", aapkt.Dst.Proto.Network, aapkt.Dst.Proto.Node)
					continue
				}
				if !a.assigned {
					log.Printf("AARP: not replying to request for %d.%d (address still tentative)", aapkt.Dst.Proto.Network, aapkt.Dst.Proto.Node)
					continue
				}

				// Hey that's me! Let them know!
				if err := a.heyThatsMe(aapkt.Src); err != nil {
					log.Printf("AARP: Couldn't respond to Request: %v", err)
					continue
				}

			case aarp.ResponseOp:
				log.Printf("AARP: %d.%d is at %v",
					aapkt.Dst.Proto.Network, aapkt.Dst.Proto.Node, aapkt.Dst.Hardware,
				)
				a.addressMappingTable.Learn(aapkt.Dst.Proto, aapkt.Dst.Hardware)

				if aapkt.Dst.Proto != a.myAddr.Proto {
					continue
				}
				if !a.assigned {
					a.reroll()
				}

			case aarp.ProbeOp:
				log.Printf("AARP: %v probing to see if %d.%d is available",
					aapkt.Src.Hardware, aapkt.Src.Proto.Network, aapkt.Src.Proto.Node,
				)
				// AMT should not be updated, because the address is tentative

				if aapkt.Dst.Proto != a.myAddr.Proto {
					continue
				}
				if !a.assigned {
					// Another node is probing for the same address! Unlucky
					a.reroll()
					continue
				}

				if err := a.heyThatsMe(aapkt.Src); err != nil {
					log.Printf("AARP: Couldn't respond to Probe: %v", err)
					continue
				}
			}
		}
	}
}

// Resolve resolves an AppleTalk node address to an Ethernet address.
// If the address is in the cache (AMT) and is still valid, that is used.
// Otherwise, the address is resolved using AARP.
func (a *AARPMachine) Resolve(ctx context.Context, ddpAddr ddp.Addr) (ethernet.Addr, error) {
	result, waitCh, winner := a.lookupOrWait(ddpAddr)
	if waitCh == nil {
		return result, nil
	}

	if winner {
		if err := a.request(ddpAddr); err != nil {
			return ethernet.Addr{}, err
		}
	}

	ticker := time.NewTicker(aarpRequestRetransmit)
	defer ticker.Stop()

	ctx, cancel := context.WithTimeout(ctx, aarpRequestTimeout)
	defer cancel()

	for {
		select {
		case <-ctx.Done():
			a.requestingStopped(ddpAddr)
			return ethernet.Addr{}, ctx.Err()

		case <-waitCh:
			result, waitCh, winner = a.lookupOrWait(ddpAddr)
			if waitCh == nil {
				return result, nil
			}

		case <-ticker.C:
			if !winner {
				continue
			}
			if err := a.request(ddpAddr); err != nil {
				return ethernet.Addr{}, err
			}
		}
	}
}

// Re-roll a local address
func (a *AARPMachine) reroll() {
	a.mu.Lock()
	defer a.mu.Unlock()
	if a.cfg.EtherTalk.NetStart != a.cfg.EtherTalk.NetEnd {
		// Pick a new network number at random
		a.myAddr.Proto.Network = rand.N(
			a.cfg.EtherTalk.NetEnd-a.cfg.EtherTalk.NetStart+1,
		) + a.cfg.EtherTalk.NetStart
	}

	// Can't use: 0x00, 0xff, 0xfe, and should avoid the existing node number
	newNode := rand.N[ddp.Node](0xfd) + 1
	for newNode != a.myAddr.Proto.Node {
		newNode = rand.N[ddp.Node](0xfd) + 1
	}
	a.myAddr.Proto.Node = newNode
	a.probes = 0
}

// Send an AARP response
func (a *AARPMachine) heyThatsMe(targ aarp.AddrPair) error {
	respFrame, err := ethertalk.AARP(a.myAddr.Hardware, aarp.Response(a.myAddr, targ))
	if err != nil {
		return err
	}
	//log.Printf("AARP: sending packet %+v", respFrame)
	// Instead of broadcasting the reply, send it to the target specifically?
	respFrame.Dst = targ.Hardware
	respFrameRaw, err := ethertalk.Marshal(*respFrame)
	if err != nil {
		return err
	}
	return a.pcapHandle.WritePacketData(respFrameRaw)
}

// Broadcast an AARP Probe
func (a *AARPMachine) probe() error {
	probeFrame, err := ethertalk.AARP(a.myAddr.Hardware, aarp.Probe(a.myAddr.Hardware, a.myAddr.Proto))
	if err != nil {
		return err
	}
	probeFrameRaw, err := ethertalk.Marshal(*probeFrame)
	if err != nil {
		return err
	}
	return a.pcapHandle.WritePacketData(probeFrameRaw)
}

// Broadcast an AARP Request
func (a *AARPMachine) request(ddpAddr ddp.Addr) error {
	reqFrame, err := ethertalk.AARP(a.myAddr.Hardware, aarp.Request(a.myAddr, ddpAddr))
	if err != nil {
		return err
	}
	reqFrameRaw, err := ethertalk.Marshal(*reqFrame)
	if err != nil {
		return err
	}
	return a.pcapHandle.WritePacketData(reqFrameRaw)
}

type amtEntry struct {
	hwAddr     ethernet.Addr
	last       time.Time
	updated    chan struct{}
	requesting bool
}

// addressMappingTable implements a concurrent-safe Address Mapping Table for
// AppleTalk (DDP) addresses to Ethernet hardware addresses.
type addressMappingTable struct {
	mu    sync.Mutex
	table map[ddp.Addr]*amtEntry
}

// Learn adds or updates an AMT entry.
func (t *addressMappingTable) Learn(ddpAddr ddp.Addr, hwAddr ethernet.Addr) {
	t.mu.Lock()
	defer t.mu.Unlock()
	if t.table == nil {
		t.table = make(map[ddp.Addr]*amtEntry)
	}
	oldEnt := t.table[ddpAddr]
	if oldEnt == nil {
		t.table[ddpAddr] = &amtEntry{
			hwAddr:     hwAddr,
			last:       time.Now(),
			updated:    make(chan struct{}),
			requesting: false,
		}
		return
	}

	oldEnt.hwAddr = hwAddr
	oldEnt.last = time.Now()
	oldEnt.requesting = false
	close(oldEnt.updated)
	oldEnt.updated = make(chan struct{})
}

// lookupOrWait returns either the valid cached Ethernet address for the given
// DDP address, or a non-nil channel that is closed when the entry is updated.
// It also reports if this is the first call since the entry became invalid.
func (t *addressMappingTable) lookupOrWait(ddpAddr ddp.Addr) (ethernet.Addr, <-chan struct{}, bool) {
	t.mu.Lock()
	defer t.mu.Unlock()
	if t.table == nil {
		t.table = make(map[ddp.Addr]*amtEntry)
	}
	ent := t.table[ddpAddr]
	if ent == nil {
		ch := make(chan struct{})
		t.table[ddpAddr] = &amtEntry{
			updated:    ch,
			requesting: true,
		}
		return ethernet.Addr{}, ch, true
	}
	if time.Since(ent.last) >= maxAMTEntryAge {
		if ent.requesting {
			return ent.hwAddr, ent.updated, false
		}
		ent.requesting = true
		return ent.hwAddr, ent.updated, true
	}
	return ent.hwAddr, nil, false
}

func (t *addressMappingTable) requestingStopped(ddpAddr ddp.Addr) {
	t.mu.Lock()
	defer t.mu.Unlock()
	if t.table == nil {
		return
	}
	ent := t.table[ddpAddr]
	if ent == nil {
		return
	}
	ent.requesting = false
}